Rule #1: Never brew in socks.

Thursday, December 22, 2011

The Aphrodisiac (12/22/11)

While Jack was in Nashville for December break, I brewed a batch of raspberry chocolate ale with Greg from Peet's. Named 'The Aphrodisiac' for its invigorating flavors—we hope it will last until Valentine's day. The recipe is based on our previous batch of raspberry stout, but we're adding some cacao nibs to the fermenter after fermentation is complete. For the raspberry, we're adding 3 lbs of Vintner's Harvest raspberry puree a couple of days into fermentation, as we did the first time. The only difference between this recipe and the last, besides the cacao nibs, is that the local homebrew shop was out of pale chocolate malt, so instead of half a pound of regular chocolate malt and half a pound of pale chocolate malt, we added a full pound of regular chocolate malt.

The raspberry is very slightly cooked in the canning process, so it has a slightly jammy taste. I wouldn't want this flavor in all fruit beers (e.g., fruit lambics), but I think that in dark, viscous beers it works quite well. The cacao nibs should add a rich, natural chocolate flavor and bitterness. I expect this beer to taste like a raspberry chocolate truffle, with carbonation. And alcohol.

Batch Size: 5 gal
Boil Volume: 4 gal
Calculated OG: 1.069
Measured FG: 1.019
Calculated ABV: 6.5
Calculated IBUs (Tinseth): 40
Pitching Temperature: 65F
Yeast: Nottingham
Starter: none
Fermentation vessel: Bucket

Malts Mashed Amount %
Chocolate 1 11%
Roasted Barley 0.25 3%
Crystal 60 0.75 8%
Other Fermentables Amount %
DME 7 78%
Hops/Additions Amount Time AA%
Kent Goldings 1 60 6.7%
Kent Goldings 1 5 6.7%

12/26/11: Added raspberry puree.

1/6/12: Racked into secondary, on top of 6 oz of cacao nibs from Theo Chocolate, which I cracked with a rolling pin and soaked in rye whiskey to sanitize.

1/7/12: Gravity of 1.019. For some reason, the beer did not attenuate as well this time. Perhaps the yeast wasn't as viable, or preferred the temperature or water at Hampshire.

Bottled 1/22/12 to 2.4 volumes of C02.

Sunday, November 20, 2011

Glossary of Terms

Ingredients:

Hops - There are dozens of hop varietals, with widely ranging flavors. Wikipedia has a pretty good list.

Malt extract - Available in liquid (LME) or dry (DME) forms, this extract is a concentration of the sugars present in the wort after the mash. Using extract obviates the need for a mash. So far all of our beers have been extract based, with specialty grains for flavor.

Base malt - Malt that has been relatively lightly kilned, so as to not destroy the starch-converting enzymes. Base malt is the only malt that must be included in beer, since only base malt can produce fermentable sugars. Common varieties of base malt include: Pilsner, 2 row, Munich, and Vienna.

Specialty grains:

Crystal; crystal malt - Malted barley that has been stewed and then dried, in a process that causes starches to be converted into sugars via enzymatic action. These malts do not need to be mashed (i.e., steeped carefully to allow this very enzymatic conversion), and can be steeped very casually. Crystal malts add caramel-type flavors and unfermentable sugars to a beer, making it sweeter and more viscous. Crystal malt is categorized according to how dark it has been roasted, where a higher number corresponds to a darker malt and a more intense caramel flavor.

Roasted barley; black barley - Unmalted barley that has been very deeply roasted. Gives beer a nutty, coffee-like flavor. The characteristic flavor of modern stouts.

Black patent - Malted barley that has been very deeply roasted. Similar in flavor to roasted barley, but less coffee-like and with a bit more of an smoky edge. Often included in smaller quantities than roasted barley in stouts and porters.

Chocolate malt - Malted barley that has been roasted slightly less than black patent. Flavors of unsweetened chocolate and bread-crust dominate. The characteristic flavor of modern brown ales.

Measurements:

Original gravity (OG) - A measurement of the specific gravity (i.e., density) of the wort before fermentation. Water has a specific gravity of 1, and a liquid with anything held in solution will increase that liquid's specific gravity. Therefore, a wort with a high specific gravity, such as 1.080, is a wort with a lot of stuff in solution, which are usually fermentable sugars.

Final Gravity (FG) - A measurement of the specific gravity (i.e., density) of a beer after fermentation. As the sugars, which are heavier than water, are converted to alcohol, the density of the beer decreases. A beer with a low final gravity is a beer with very few unfermented sugars left—a dry beer, in other words.

ABV - We calculate alcohol content by subtracting a beer's final gravity from its original gravity and multiplying by a nonlinear coefficient, which is about 131 in the usual range for beer. For example, the Golden Bear has an original gravity of 1.073 and a final gravity of 1.008.

1.073 - 1.008 = 0.065
0.065 * 131 = 8.5

Thus, the Golden Bear is a calculated 8.5 percent alcohol.

International Bitterness Units (IBUs) - A measure of the concentration of isomerized alpha acids, which are the main bittering compounds in beer. A beer with higher IBUs will probably taste more bitter. We calculate IBUs using the Tinseth formula, which we've found to be closer to what we perceive in our beers than the Rager formula, which is the other one commonly used. In any case, calculated IBUs of any sort should be considered only an estimate.

Alpha Acid Percentage (AA%) - A measure of the concentration of alpha acids in hops. Hops high in alpha acids have a high bittering potential.

Flavor compounds:

Acetaldehyde - A yeast byproduct with a sharp, green apple flavor. Generally considered an off-flavor at detectable levels.

Diacetyl - A yeast byproduct with a buttery flavor. Generally considered an off flavor at detectable levels.

Esters - Usually yeast byproducts; typically associated with fruit flavors. English ale yeasts produce moderate amounts of esters. Hefeweizen yeasts and some Belgian ale yeasts produce high levels of esters.

Fusel alcohols - In addition to ethanol, yeast produce smaller quantities of heavier alcohols. Fusel alcohols contribute boozy flavors associated with wine and spirits, which can be sharp and unpleasant.

Phenols - Usually yeast byproducts; typically associated with spices such as clove or black pepper. Hefeweizen yeasts and some Belgian ale yeasts produce high levels of esters.

Styles:

For information on beer styles, see the BJCP style guidelines.

Brewing equipment:

Mash tun: An insulated container that maintains a near-constant temperature over the course of a mash. Our mash tun is as yet, incomplete, due to lack of the proper plumbing pieces and lack of desire to drive to Shoreline to get said pieces.

Brew kettle: A large container that holds the wort during the boil. Ours is a big (7 gallon) stainless steel pot that we put on our stove.

Our brew kettle with wort chiller

Wort chiller: Not strictly necessary, but very helpful. We've recently purchased a copper immersion wort chiller, which replaces our previous system of putting the brew kettle in the bathtub with a bunch of ice cubes and/or snow, frozen 2L soda bottles, &c.

Immersion wort chiller

Fermenter: The vessel in which the beer is fermented. We've used 7-gallon food-grade plastic buckets, a 6-gallon PET carboy (a container shaped like the water jug on an office cooler), and various 1-gallon glass wine and cider jugs.

The fermentation chamber

Serving/carbonation system: Since we bottle condition all of our beers, our bottling system serves as both a carbonation and serving method. We have a bucket with a spigot that we use to decant the beer into (from the fermenter), as well as mixing the priming sugar into the beer. We then attach a bottling tube to the bucket's spigot and draw the beer into bottles, capping them with our hand-capper. Three weeks later, the beer is carbonated and ready to drink, though pouring the beer off the yeast and into a glass is recommended. Keep the bottle upright and pour slowly so as not to disturb the yeast that have settled to the bottom. Stop pouring when you see the yeast start to reach the mouth of the bottle, leaving about 1/4 - 1/8th of an inch of beer left in the bottle.

If you're serious about brewing, check out John Palmer's How to Brew, which is one of the best introductory texts that I've read on any subject.

Saturday, November 19, 2011

Chomp Chomp

November 19, 2011

Tonight we brew the second incarnation of the Belgian IPA. This time, instead of brewing an IPA with Belgian yeast, we decided to come at it from the Belgian side of things, ditching the crystal malt and increasing the amount of cane sugar to dry the beer out even more. We also decided that a blind pursuit of fruit-resembling flavors was destined to run into what I think of as the Jolly Rancher problem, namely that non-fruit-derived fruity flavors tend to taste artificial in very high concentrations, as can happen when you pair a very estery yeast (such as Chimay's, or a hefeweizen yeast) with American hops bred for their fruit character (such as Amarillo and Centennial). This time, we decided to emphasize the spicy side of hops and yeast. We selected a yeast that produces more spicy phenols, and used American hops that tend more towards spicy, herbal, or piney flavors. Oh yeah, and we're adding three times as much hops.

Batch Size: 2.5 gal
Boil Volume: 3.5 gal
Calculated OG: 1.069
Estimated FG: 1.011
Estimated ABV: 7.5%
Calculated IBUs (Tinseth): 67
Pitching Temperature: 65F
Yeast: Wyeast 1388 Belgian Strong
Starter: none
Fermentation vessel: Bucket

Other Fermentables Amount % Max Pts.
DME 3 75% 42.00
Cane Sugar 1 25% 46.00
Total 4 100% 172.00
Hops/Additions Amount Time AA% IBU's
Horizon 0.25 60 11.9% 20.42
Horizon 0.75 10 11.9% 22.21
Chinook 0.25 10 11.8% 7.34
Nugget 1 3 11.0% 9.39
Chinook 0.75 3 11.8% 7.55

11/23/11 - Added 1 lb of cane sugar. The smell was potent.

11/27/11 - Dry hopped with 1 oz of Horizon (whole cone), 1 oz of Chinook (pellets), and 1 oz of Nugget (pellets).

12/13/11 - Bottled to 2.8 volumes of C02.

Sunday, November 6, 2011

Surly Sunday Brewday 11/6/11

Along with pitching yeast to two batches of cider and brewing a mini-batch of hefeweizen imperial stout, we brewed a 2.5 gallon batch of stout to which we intend to add coffee. Seeing as roasted grains, particularly roasted unmalted barley, are the main flavor in any stout worthy of the name, adding the right amount of roasted barley is crucial. We used our previous experience brewing dark beers to hone in what we hope will be an ideal percentage of roasted grains for an imperial stout of appropriate intensity. We're also adding some Belgian dark sugar syrup we had on hand, which should add a caramel/raisin complexity and a touch of dryness.

Batch Size: 2.5 gal
Boil Volume: 3.5 gal
Calculated OG: 1.089
Estimated FG: 1.020
Estimated ABV: 9.1
Calculated IBUs (Tinseth): 49
Pitching Temperature: 65F
Yeast: Wyeast American Ale 1056
Starter: none
Fermentation vessel: Bucket

Malts Mashed Amount %
Roast Barley 1.1 17%
Chocolate 0.7 11%
Other Fermentables Amount %
DME 4 63%
Candi Sugar (dark) 0.5 8%
Hops/Additions Amount Time AA% IBU's
Horizon 0.8 60 11.9% 49.27

I've had some coffee beers that I liked, and some that I didn't. Based on my experience with espresso pulled directly into beer, I came to the conclusion that not everything in coffee is complementary to beer. Many of the coffee acids and solids that abound in espresso, for example, are quite unpleasant in beer. How full-bodied the coffee is has no consequence, because it will be overwhelmed by how full-bodied the beer is. What is really desired in a coffee stout is just the aromatic compounds from the beans. I therefore decided to cold brew the coffee and add it to the beer at bottling, to limit the quantity of solids and acids in the beer.

We tasted 5 different coffees from Peet's Coffee and Tea: a washed Ethiopian, a Kenyan (also washed), a Mocha-Java blend, Peet's Fair Trade Blend, and a Sulawesi. I cold-brewed .1 lbs of each coffee with 12 oz of water at ~70F for a little over 24 hours, then poured them through a paper filter.

Coffee cold-brewing for the taste test

We chilled and tasted the coffees, as well as adding them to a sample of the stout from the fermenter. We found that the Arabian Mocha-Java provided the perfect complement to the roasted barley of the stout, bringing out a more intense chocolate flavor than was present in either the coffee or the beer alone. Sulawesi ran a close second; I would definitely consider using it in a future beer.

I brewed .25 lbs of Mocha Java—ground medium-fine—in a quart of water at ~70F for a little under 24 hours. I left much of the water behind with the grounds in hopes of a cleaner flavor, and faster filtering since I had work that day, so we ended up with about 17 oz of concentrated cold-brew, or about 5% of the total volume. This level of coffee is distinct, but not overpowering. Chocolate and earthy notes dominate the aroma, but the beer finishes malty with enough bitterness for balance. Very full-bodied with a light effervescence. Delicious.

Bottled on 12/3/11 to 2 vol. of C02 and added 17 oz of concentrated, cold-brewed Arabian Mocha Java.

Thursday, October 27, 2011

The IPA Part II 10/27/11

Our first IPA was damn good, but it has started to lose its freshness. With my father, major aficionado of the IPA, coming to visit next month, it was high time to brew another. The main failing of our last IPA, I think, was the fact that it didn't have enough bittering hops. This time I decided to just try to reach the highest possible level of IBUs. There is some debate about how many IBUs can fit in a beer, but I think it's safe to say that, whatever the number is, we should reach it with this beer.

The malts and yeast are identical to the last IPA, and we used the same hops (Horizon, Centennial, and Citra) but added another: Columbus (AKA Tomahawk and Zeus), which I hope will add a pungency that was lacking in our last IPA. We haven't used Columbus before, but it makes an appearance in many of my favorite IPAs, including Firestone Walker's Union Jack and Double Jack, Russian River's Pliny the Elder, Stone's IPA and Ruination double IPA, and Bear Republic's Racer 5.

Batch Size: 2.5 gal
Boil Volume: 3.5 gal
Calculated OG: 1.071
Measured FG: 1.012
Estimated ABV: 7.7
Calculated IBUs (Tinseth): 150
Pitching Temperature: 65F
Yeast: Wyeast American Ale 1056
Starter: none
Fermentation vessel: Bucket

Malts Mashed Amount % Max Pts. Color
Crystal 40 0.25 6% 35.00 40.00
Other Fermentables Amount % Max Pts. Color
DME 3.5 82% 42.00 2.00
Cane Sugar 0.5 12% 46.00 0.00
Hops/Additions Amount Time AA% IBU's
Horizon 1 60 11.2% 118.71
Columbus 1 30 14.0% 114.04
Centennial 1 2 8.0% 7.17
Citra 1 2 6.0% 5.38

The brewday went as well as any we've ever had. No boilovers; we remembered to add yeast nutrient; both of us were hale enough to do our fair share; and most importantly, we had an immersion wort chiller. An immersion wort chiller is basically a long coil of copper tubing through which cold water is pumped. With the wort chiller and vigorous stirring, it took under 10 minutes—maybe under 5—to chill the wort, as opposed to the hour that we usually spend throwing ice in the bathtub. We were also able to chill the wort to a lower temperature: 65F instead of 70F+. A lower temperature at the start of fermentation is desirable because it minimizes certain off-flavors, particularly harsh alcohol flavors.

We dry hopped with 3 oz of Citra for 1 week.

Bottled 11/9/11.

Impressions

Lee: This has the bitterness our last IPA was lacking, as well as an herbal pungency that I attribute to the addition of Columbus hops. Too bitter for anyone who isn't into IPAs, but just right for my taste. It doesn't have quite as intense a fruity aroma as the last IPA, though, which I attribute to the shorter dry-hopping period. An excellent beer, and better than most IPAs on the shelves, but still room for improvement.

Sunday, October 2, 2011

The Cosmos 9/29/11

Angry Monocle's first anniversary is just around the corner, and we thought we'd brew something special for it. From the filthy depths of our minds came The Cosmos, a ravishingly dark hybrid of a Belgian Quadrupel and an American Imperial Stout. This heavy brew combines the esters and phenolics of Trappist yeast, the dark fruit flavors of special B and Belgian Candi syrup, and a massive quantity of roasted barley, imparting roasted coffee and dark chocolate flavors. With an expected ABV of near 12%, this beer is our biggest yet.

Batch Size: 5 gal
Boil Volume: 4 gal
Calculated OG: 1.113
Measured FG: 1.022
ABV: 12%
Calculated IBUs (Tinseth): 27
Pitching Temperature: 70F
Yeast: Wyeast 3787
Starter: yeast cake
Fermentation Vessel: Bucket

Malts Mashed Amount %
Roast Barley 2 13%
Special B 1 7%
Other Fermentables Amount %
Candi Sugar (dark) 1.5 10%
DME 10.75 70%
Hops/Additions Amount Time AA%
Horizon 0.8 60 11.9%
Fuggles 0.5 30 4.5%
Fuggles 0.5 20 4.5%

Hannah and John came by to help with the brewing process, giving us a much needed hand as we were bottling the Belgian Black simultaneously. This was necessary, because with a beer this big you need a ton of yeast. Lee had proposed making a four and half liter starter just to cultivate a enough yeast for this beast, but fortunately there was an easier way. We decided to treat our last brew, the 2.5 gal Belgian Black, as the starter and just dump the wort for the Quadrupel Stout onto its yeast cake. This meant we were going to have to bottle just before the wort was ready, to prevent the yeast from losing viability or getting infected.

While Lee and I kept our hands busy bottling and tending to the steeping grains, John and Hanna mixed the DME into the kettle. A miscommunication resulted in John's attempt to add 800 ounces of DME to the brew, a measure which would have broken our extract bank and one which was fortunately caught before he'd added more than 3/4lbs extra extract. So our 10.5% beer became 11.5%. There was also some scorching as result of insufficient stirring, however, with all the flavors in this baby, its unlikely to matter. Otherwise, the whole process went to plan. Except we forgot the yeast nutrient (oops!).

After being pitched onto the yeast cake and aerated vigorously, the beer quickly began to bubble. By the next morning a steady stream of bubbles was coming through the blow-off tube. This was quickly followed by huge amounts of blow-off, enough to pop the lid off the fermenter three times. We attempted to combat the blow-off by scooping the top layer of krausen off twice, leaving just enough to cover the beer. The beast was quickly able to regenerate the krausen, but stopped blowing off by the second day of fermentation.

Racked to secondary 11/1/11.

Bottled 12/18/11.

Saturday, September 24, 2011

The Belgian Black 9/17/11

A Belgian beer with a roasted coffee character, the Belgian Black is conceived as a dry, fruity, roasted beer unlike any made in the low countries or anywhere else. I don't know where the idea for this beer came, with its subtle flavors and unusual character. I normally try to put as much in a beer as possible; this time I held back. The Belgian Black is supposed to go down easy with a low final gravity and well balanced flavors. This is our first time here at Angry Monocle trying to combine Belgian yeast and roasted barley, and we can't wait to see how it comes out!

Batch Size: 2.5 gal
Boil Volume: 3.5 gal
Calculated OG: 1.063
Estimated FG: 1.011
ABV: 6.8
Calculated IBUs (Tinseth): 14
Pitching Temperature: 70F
Yeast: Wyeast 3787
Starter: none
Fermentation Vessel: Bucket

Malts Mashed Amount %
Roast Barley 0.25 6%
Other Fermentables Amount %
DME 3.1 81%
Cane Sugar 0.5 13%
Hops/Additions Amount Time AA%
UK Fuggles 0.25 10 4.5%
UK Fuggles 0.5 30 4.5%
UK Fuggles 0.25 0 4.5%

We were forced to use Fuggles after the our LHB shop was out of Styrian Goldings. The final batch size was closer to 2.3 gallons that 2.5, this was adjusted to 2.5 with the addition of the sugar 3 days after the boil.

Bottled on 9/29/11

Impressions

Lee: This beer has the combination of sweet, approachable flavors and crisp dryness that makes Belgian ales so easy and enjoyable to drink. The Belgian yeast dominates the nose, while the roasted barley comes through in the finish. My only critique of the beer is that it feels a bit unbalanced. Next time I would raise the IBUs a bit.